V-200PA Automatic Screen Filter

 

V-200PA Specifications
Materials  
  • Filter body
  • 3" NPT inlet/outlet
  • 3" BSP inlet/outlet
  • Glass reinforced Nylon
  • Screens
  • 316L SS sintered **
Filtration Range
  • 10 to 1500 micron **
Flow Range
  • 6.8 to 50 m3/hr (30 to 220 gpm) per filter
Max Pressure
  • 9.7 bar (140 psi) **
Min Pressure
  • 2 bar (30 psi) **
Max Temp
  • 60° C (140° F) **
Flush Cycle
  • 10 to 15 seconds
Control Options
  • VF-AC - electronic, up to 12 filters
  • MicroFlush - up to 4 filters
** Other options are available on request.

The award wininng V-200PA features the most advanced and cost effective self-cleaning screen filtration technology available today. Ideal for flow rates from 6.8 m3/hr (30 gpm) to 50 m3/hr (220 gpm); the V-200PA offers a best value solution for automatic filtration down to 10 micron.

The V-Series® patented drive mechanism used in the V-200PA is the most efficient and simplistic design available resulting in:

  • Fewer moving parts
  • Simpler controls
  • Lowest flush flow rates and volumes available
  • No power required
  • Cleans in one pass
  • Limited maintenance requirements

The V-200PA is constructed using glass reinforced nylon and 316L stainless steel. The inherent corrosion resistance of these materials ensures a long service life under a wide range of water quality conditions.

The V-Series’ 10 to 15 second flush cycle is automatically initiated when a pressure differential across the screen increases to a maximum of .5 bar (7 psi). The filter remains on-line, and the filtration process remains uninterrupted during the cleaning process. The flush discharge is the lowest available resulting in minimal waste.

The V-200PA is perfectly suited for process water, cooling tower filtration, pre-filtration of membrane, irrigation, or wherever suspended solids are removed down to 10 micron.

For more information contact VAF!  Wherever Water Flows...

 

Documents: