Model 88 Single Liquid Bag Housing
Also Available: Model 88, 100 PSI Liquid Bag Housing
VAF's Model 88 Single Series of Liquid Bag Housings offer two depths, a 15" and a 30" housing depending upon the needed surface area and volume of fluid to be filtered.
FEATURES
- Carbon 304 or 316 stainless steel material
- 150 PSI pressure rating
- Low pressure drop
- Quick swing closure with eye nuts
- Viton seals - lid & basket
- Differential, drain & vent ports
- Adjustable support legs
- 316 stainless steel strainer basket
- 2-part epoxy paint finish on carbon vessels
Our 88 series effectively removes dirt, pipe scale, and other contaminants from process liquids such as water, chemical and petroleum products. Quality construction and design assure protection from all down-stream equipment.
VESSEL CONSTRUCTION: Our Model 88 single vessels are designed for operating up to 150 PSI at 300°F. The housing design provides a large sump area at the bottom of the basket for particulate accumulation. This design utilizes the filter more efficiently and prolongs the element life.
The 316 S.S. basket seals on the viton o-ring to eliminate particulate bypass between the basket and seat. Optional mesh-lined strainer baskets and o-rings are available. Please refer to their individual brochures in our liquid catalog.
A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located on the body of the housing to install gauges for monitoring the differential pressure across the bag. Permanently piped housings are opened with simple tools without disturbing the piping. Swing bolts with eye-nuts allow easy opening and closing of the swing-lid. No need to remove any hardware.
As a standard finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel vessels are supplied with a satin finish.
Dimensions & Specifications
Also Available: Model 88, 100 PSI Liquid Bag Housing